Temporary Climate Solutions HCI-600RBT
550,000 BTU/Hr · Indirect‑Fired Fuel Oil Heater with Remote Bulk TankModel: HCI-600RBT · Category: Indirect‑Fired Heater
Key Features
- Riello burner technology
- Designed for remote bulk fuel tanks for extended runtime
- Flat‑free wheels with locking casters
- Built‑in volt meter
- Tiger‑Loop filter system
- Ductable up to 150′
- Rugged, stackable frame built for rental fleets
Applications
- Long‑duration projects needing continuous heat
- Construction sites, temporary facilities, and industrial maintenance
- Events, large tents, and warehousing
- Emergency response and restoration environments
Downloads
Technical Specifications
| Fuel Type | Fuel Oil (Remote Bulk Tank) |
|---|---|
| BTU/HR | 550,000 |
| CFM | 6,000 |
| Fuel Tank Capacity | Remote Bulk Tank |
| Fuel Consumption | 3.95 GPH |
| Heat Exchanger | Fully welded 304 stainless steel |
| Air Outlet Diameter | Optional single 16″ or 20″; stock dual 12″ |
| Air Inlet Diameter | Single 16″ |
| Burner Technology | Riello |
| Amperage Draw | 20 A |
| Power Requirements | 120 V |
| Dimensions (L×W×H) | 70″ × 30″ × 78″ |
| Weight | 900 lb |
*Specs per manufacturer. Always verify electrical, fuel supply, and duct sizing for site conditions.
Need help sizing?
Our team can help you determine the right BTUs and ducting for your project.Related Models
FAQs
What’s the advantage of the Remote Bulk Tank (RBT)?
It enables long, uninterrupted runtime and simplified refueling logistics for large jobsites. The heater is plumbed to an external tank to minimize downtime.
What duct sizes can I use?
Stock outlets are dual 12″. Optional single‑duct adapters are available for 16″ or 20″ runs (check static pressure for long duct runs).
Does it require a thermostat?
Yes — use a remote thermostat and run the unit outside with clean air intake. Follow manufacturer instructions for safe setup.
Temporary Climate Solutions HCI-600RBT
550,000 BTU/Hr · Indirect‑Fired Fuel Oil Heater with Remote Bulk TankModel: HCI-600RBT · Category: Indirect‑Fired Heater
Key Features
- Riello burner technology
- Designed for remote bulk fuel tanks for extended runtime
- Flat‑free wheels with locking casters
- Built‑in volt meter
- Tiger‑Loop filter system
- Ductable up to 150′
- Rugged, stackable frame built for rental fleets
Applications
- Long‑duration projects needing continuous heat
- Construction sites, temporary facilities, and industrial maintenance
- Events, large tents, and warehousing
- Emergency response and restoration environments
Downloads
Technical Specifications
| Fuel Type | Fuel Oil (Remote Bulk Tank) |
|---|---|
| BTU/HR | 550,000 |
| CFM | 6,000 |
| Fuel Tank Capacity | Remote Bulk Tank |
| Fuel Consumption | 3.95 GPH |
| Heat Exchanger | Fully welded 304 stainless steel |
| Air Outlet Diameter | Optional single 16″ or 20″; stock dual 12″ |
| Air Inlet Diameter | Single 16″ |
| Burner Technology | Riello |
| Amperage Draw | 20 A |
| Power Requirements | 120 V |
| Dimensions (L×W×H) | 70″ × 30″ × 78″ |
| Weight | 900 lb |
*Specs per manufacturer. Always verify electrical, fuel supply, and duct sizing for site conditions.
Need help sizing?
Our team can help you determine the right BTUs and ducting for your project.Related Models
FAQs
What’s the advantage of the Remote Bulk Tank (RBT)?
It enables long, uninterrupted runtime and simplified refueling logistics for large jobsites. The heater is plumbed to an external tank to minimize downtime.
What duct sizes can I use?
Stock outlets are dual 12″. Optional single‑duct adapters are available for 16″ or 20″ runs (check static pressure for long duct runs).
Does it require a thermostat?
Yes — use a remote thermostat and run the unit outside with clean air intake. Follow manufacturer instructions for safe setup.
