Flagro F-375: Direct Fired Heater
Quick Quote Request
Buy Direct & Save
"*" indicates required fields
The Flagro F-375 375,000 BTU Direct-Fired Propane Heater delivers powerful, adjustable temporary heat for commercial construction sites, industrial maintenance, and properly ventilated work areas. Designed to operate without electricity, this portable heater features a stackable frame and includes a propane hose and adjustable regulator.
Key Specifications:
- Heating Capacity: 220,000–375,000 BTU/hr
- Fuel: Vapor Propane
- Fuel Consumption: 10.1–17.3 lbs/hr
- Electrical: Not Required
- Ignition: Manual
- Propane Hose: 20′ Included
- Regulator: Adjustable, Included
- Air Outlet: 13″
- Optional Fan: 800 CFM, 120V
- Weight: 65 lbs
Features: Adjustable heating output, no electricity required, stackable construction, and optional forced-air circulation.
Nationwide shipping available. Contact Climate Control Solutions for pricing and availability.
The Flagro F-375 375,000 BTU Direct-Fired Propane Construction Heater delivers powerful, adjustable temporary heating for construction sites, industrial maintenance, building renovations, and commercial work areas. With a heating capacity ranging from 220,000 to 375,000 BTU/hr, this portable heater is designed for demanding cold-weather construction applications.
Operating on vapor propane, the F-375 provides reliable heating without requiring electricity, a powered blower, or a generator. Its manual ignition system and adjustable propane regulator allow heating output to be matched to appropriate jobsite requirements.
The heater includes a 20-foot propane hose and adjustable regulator, supporting connection to a properly sized external propane supply.
For applications requiring additional air circulation, an optional 800 CFM fan assembly can be installed. The fan operates on 120V electrical power and helps distribute warm air throughout suitable construction areas.
With a rugged, stackable frame, 13-inch air outlet, and lightweight 65-pound design, the Flagro F-375 offers a practical temporary heating solution for commercial contractors.
Key Features of the Flagro F-375
- 375,000 BTU/hr Maximum Heating Capacity: Provides powerful temporary heating for commercial construction and maintenance projects.
- Adjustable Heating Output: Operates between 220,000 and 375,000 BTU/hr.
- Vapor Propane Operation: Uses an appropriately sized external propane supply.
- No Electricity Required: Standard heater operates without a powered blower or electrical connection.
- Direct-Fired Heating: Generates heat directly without a separate heat exchanger.
- Manual Ignition: Straightforward ignition system designed for temporary construction heating.
- 20-Foot Propane Hose Included: Provides flexibility when connecting the heater to its propane supply.
- Adjustable Regulator Included: Manufacturer-listed regulator adjustable up to 20 PSI.
- Optional 800 CFM Fan: Adds powered airflow for more effective heat distribution when required.
- 13-Inch Air Outlet: Large discharge opening for heated-air delivery.
- Lightweight Construction: Weighs approximately 65 pounds.
- Stackable Design: Allows efficient storage and transportation of multiple heaters.
- Commercial-Grade Construction: Designed for temporary construction and maintenance applications.
- UL of Canada Listed: Manufacturer-listed equipment certification.
Adjustable Heating from 220,000 to 375,000 BTU/hr
The Flagro F-375 provides adjustable heating output to accommodate different jobsite conditions.
Rather than operating at a single fixed heating capacity, the unit can be adjusted within its rated range.
| Heating Setting | Heating Capacity |
|---|---|
| Minimum | 220,000 BTU/hr |
| Maximum | 375,000 BTU/hr |
The adjustable output makes the heater useful for temporary projects with changing heating demands.
Propane consumption varies with the selected output, allowing lower fuel use when less heating capacity is needed.
Actual heating performance depends on outdoor temperatures, ventilation, building conditions, and the size of the heated area.
Propane Heating Without Electricity
One of the primary advantages of the Flagro F-375 is its ability to operate without an electrical connection.
Many commercial forced-air heaters require power for blower motors, ignition systems, and controls.
The standard F-375 operates using vapor propane and manual ignition, eliminating the need for a powered blower.
Benefits of No-Electricity Operation
- Suitable for properly ventilated construction sites without convenient electrical service
- No generator required for the standard heater
- Reduced dependence on temporary electrical infrastructure
- Convenient operation in suitable remote work areas
- Portable construction for frequent jobsite transportation
- No electric blower motor to maintain in the standard configuration
The heater still requires an appropriately sized propane supply, approved fuel connections, and adequate ventilation.
Optional 800 CFM Fan Assembly
For applications requiring additional airflow, Flagro offers an optional fan assembly for the F-375.
The B-375 fan assembly provides approximately 800 CFM of forced-air circulation.
Unlike the standard heater, the optional fan requires electrical power.
Optional Fan Specifications
| Specification | Value |
|---|---|
| Fan Assembly | B-375 |
| Airflow | 800 CFM |
| Electrical Supply | 120V |
| Included with Heater | No — Optional Accessory |
The fan can help circulate heated air in approved construction heating applications.
Important: The F-375 does not provide 800 CFM of powered airflow unless the optional fan assembly is installed.
Common Applications for the Flagro F-375
Construction Site Heating
The F-375 is designed for temporary heating during commercial construction, building renovations, and maintenance.
Typical applications include:
- Commercial construction sites
- Winter construction projects
- Temporary construction work areas
- Building renovations
- Jobsite maintenance and repair
- Temporary heating during construction activities
Its high heating output makes the F-375 suitable for larger temporary heating requirements, subject to proper equipment sizing and ventilation.
Remote Construction Projects
Remote construction projects may have limited access to temporary electrical service.
Because the standard F-375 operates without electricity, it provides a convenient heating option where a suitable propane fuel supply is available.
Industrial Maintenance
Industrial maintenance and repair projects may require supplemental heat in designated work areas.
The F-375 can provide temporary heating where direct-fired propane construction heaters are permitted.
Temporary Construction Enclosures
The heater can support certain temporary construction heating arrangements where sufficient combustion air and ventilation are provided.
The F-375 is a direct-fired heater, meaning combustion products enter the heated airflow.
It must not be used in sealed, inadequately ventilated, or otherwise prohibited environments.
Explore Commercial Heating Applications
Flagro F-375 Technical Specifications
| Specification | Flagro F-375 |
|---|---|
| Model Number | F-375 |
| Equipment Type | Direct-Fired Propane Construction Heater |
| Fuel | Vapor Propane |
| Minimum Heating Capacity | 220,000 BTU/hr |
| Maximum Heating Capacity | 375,000 BTU/hr |
| Fuel Consumption | 10.1–17.3 lbs/hr |
| Manifold Pressure | 7–20 PSI |
| Ignition | Manual |
| Electrical Supply | Not Required for Standard Heater |
| Standard Powered Blower | Not Included |
| Optional Fan Assembly | B-375 |
| Optional Fan Airflow | 800 CFM |
| Optional Fan Electrical Supply | 120V |
| Propane Hose | 20 Feet, Included |
| Regulator | Included, Adjustable to 20 PSI Maximum |
| Propane Connection | POL |
| Air Outlet Diameter | 13″ |
| Heat Exchanger | Not Applicable — Direct-Fired |
| Construction | Portable, Stackable |
| Length | 42″ |
| Width | 17″ |
| Height | 22″ |
| Weight | 65 lbs |
| Certification | UL of Canada Listed |
Specifications are based on Flagro’s published F-375 product information. All installations must comply with the current operating manual and applicable safety regulations.
Propane Fuel Consumption
The Flagro F-375 operates exclusively on vapor propane.
Its fuel consumption varies depending on the selected heating capacity.
| Specification | Value |
|---|---|
| Minimum Consumption | 10.1 lbs/hr |
| Maximum Consumption | 17.3 lbs/hr |
| Minimum Heating Capacity | 220,000 BTU/hr |
| Maximum Heating Capacity | 375,000 BTU/hr |
The propane supply must provide sufficient pressure and vaporization capacity for the heater.
At high output, the F-375 requires a substantial propane supply. Smaller cylinders may not provide sufficient vaporization capacity, especially during cold weather.
The correct cylinder or tank configuration must be selected according to Flagro’s instructions and the requirements of the installation.
Included Propane Hose and Regulator
The Flagro F-375 includes a 20-foot propane hose and adjustable regulator.
Standard Included Equipment
- 20-foot propane hose
- Adjustable propane regulator
- POL connection
The regulator is designed for a maximum setting of 20 PSI.
All propane connections must be properly installed and inspected for leaks before operation.
The supplied hose and regulator do not eliminate the need for an adequately sized propane source.
Optional Propane Cylinder Manifolds
Flagro offers optional cylinder manifold accessories for compatible construction heating applications.
2001-S2 — Two-Cylinder Manifold
The 2001-S2 supports compatible installations using two propane cylinders.
2001-S3 — Three-Cylinder Manifold
The 2001-S3 supports compatible installations using three propane cylinders.
Multiple-cylinder arrangements may help provide adequate propane vaporization capacity for higher-output heating applications.
Cylinder sizing, fuel pressure, and connection requirements must follow manufacturer instructions.
Browse Commercial HVAC Accessories
Lightweight, Stackable Construction
Despite its maximum 375,000 BTU/hr heating capacity, the Flagro F-375 weighs approximately 65 pounds.
Its compact construction is designed for transportation and storage between commercial jobsites.
Dimensions
- Length: 42 inches
- Width: 17 inches
- Height: 22 inches
- Weight: 65 pounds
The stackable design allows multiple units to be stored efficiently when not in use.
Heaters must be properly secured during transportation and operated only in their approved position.
Safety and Ventilation Requirements
The Flagro F-375 is a direct-fired propane construction heater.
Because combustion products enter the heated airflow, proper ventilation is essential.
Important Safety Considerations
- Use only for manufacturer-approved construction and maintenance applications.
- Provide adequate fresh-air ventilation.
- Do not operate in sealed or poorly ventilated spaces.
- Maintain the required clearances from combustible materials.
- Use only approved propane hoses, regulators, and fuel connections.
- Verify that the propane supply can meet the heater’s fuel demand.
- Inspect the hose and connections for leaks before operation.
- Keep the air outlet unobstructed.
- Position the heater on a stable, level surface.
- Keep propane cylinders at the required distance from the heater.
- Do not use the heater in residential or recreational vehicle applications.
- Follow all applicable fire, building, and fuel-gas requirements.
The manufacturer’s operating instructions should be consulted for specific combustible clearances, propane cylinder positioning, and approved operating conditions.
Why Choose the Flagro F-375?
The Flagro F-375 combines 375,000 BTU/hr of maximum heating capacity, adjustable propane operation, and no-electricity functionality in a compact construction heater.
Its included propane hose and regulator, lightweight stackable frame, and optional fan assembly provide flexibility for temporary commercial heating.
The ability to operate without electricity makes the F-375 especially useful for appropriately ventilated construction sites and remote projects where temporary power is limited.
Compare Other Flagro Direct-Fired Heaters
Climate Control Solutions supplies additional Flagro construction heating equipment:
- Flagro F-150: Adjustable 50,000–150,000 BTU/hr propane heater that operates without electricity.
- Flagro F-375: Adjustable 220,000–375,000 BTU/hr propane heater with an optional 800 CFM fan.
- Flagro F-400T: 400,000 BTU/hr dual-fuel forced-air construction heater.
- Flagro THC-355CDF: 330,000 BTU/hr ductable dual-fuel direct-fired heater.
Explore Commercial Heating Solutions
Frequently Asked Questions About the Flagro F-375
How much heat does the Flagro F-375 produce?
The F-375 provides adjustable heating output from 220,000 to 375,000 BTU/hr.
What fuel does the F-375 use?
The heater operates on vapor propane only.
Does the Flagro F-375 require electricity?
No. The standard heater operates without electricity. The optional 800 CFM fan assembly requires 120V power.
Does the F-375 include a fan?
No. The heater is designed to operate without a powered blower. An optional 800 CFM fan assembly is available.
What is the part number for the optional fan?
The manufacturer-listed fan assembly is the B-375.
Does the heater include a propane hose?
Yes. A 20-foot propane hose is included.
Is a regulator included?
Yes. The F-375 includes an adjustable propane regulator rated up to 20 PSI.
How much propane does the F-375 consume?
Flagro lists approximately 10.1–17.3 pounds per hour, depending on the selected heating output.
What is the air outlet diameter?
The heater features a 13-inch air outlet.
Can the F-375 operate on natural gas?
No. The F-375 is designed for vapor propane only.
Is the Flagro F-375 stackable?
Yes. Its frame is designed for efficient transportation and storage.
How much does the F-375 weigh?
The manufacturer’s current listing identifies a weight of 65 pounds.
Can the F-375 be used inside a construction enclosure?
Only in approved applications with sufficient ventilation, appropriate fuel connections, and compliance with the manufacturer’s safety requirements.
Request a Quote for the Flagro F-375
Climate Control Solutions supplies Flagro propane construction heaters, direct-fired heaters, and commercial temporary heating equipment nationwide.
The F-375 is available for purchase inquiries, with compatible propane accessories and optional fan assemblies available depending on current stock.
Contact Climate Control Solutions for pricing and availability.
Phone: (800) 633-8711
Email: [email protected]
We Are Here To Help
Please give us a call, drop us an email or fill out the contact form and we’ll get back to you.
Our Headquarters
Waco, TX 76712
"*" indicates required fields
Trusted by Clients for Exceptional Service
Looking For Multiple Units?
Contact us using the button below and we can help you get accurate pricing for your bulk orders.
Related products
Top-Quality Brands for Superior Climate Control
At Climate Control Solutions, we prioritize quality when it comes to spot coolers, portable heat pumps, and evaporative coolers. That’s why we collaborate with some of the industry’s most respected brands to offer you the finest products. Our selection features renowned names like Airrex USA, Big Ass Fans, Cajun Kool, Cool Boss, Flagro, and Master—brands celebrated for their excellence, innovation, and durability.






























