Temporary Climate Solutions F-400T
400,000 BTU/Hr · Direct‑Fired Dual‑Fuel Heater (Natural Gas / Propane)Model: F‑400T · Category: Direct‑Fired Construction Heater
Key Features
- Electronic direct spark ignition
- 100% flame safety control
- On/Off thermostat control
- Minimal products of combustion
- Portable, rugged design for jobsites
- Dual‑fuel: quickly switch between natural gas and propane
Applications
- Construction sites and temporary enclosures (with adequate ventilation)
- Industrial maintenance and general building heat
- Warehouses, large tents, and restoration projects
Safety note: Direct‑fired heaters add combustion products to the air. Provide fresh air and follow local codes; do not use in enclosed/occupied spaces without proper ventilation.
Downloads
Technical Specifications
| Fuel Type | Natural Gas / Propane |
|---|---|
| BTU/HR | 400,000 |
| CFM | 2,000 |
| Fuel Consumption | NG: 400 CFH · LPG: 4.37 GPH |
| Heat Exchanger | N/A (Direct‑fired) |
| Air Outlet Diameter | 15″ |
| Amperage Draw | 15 A |
| Power Requirements | 120 V |
| Dimensions (L×W×H) | 48″ × 22″ × 24″ |
| Weight | 90 lb |
*Specs per manufacturer. Always verify fuel supply, electrical, and ventilation for site conditions.
Need help sizing?
Our team can help you determine the right BTUs and air changes for your project.Related Models
- HC‑1000 — Direct‑Fired, 1,000,000 BTU/Hr (Dual‑fuel)
- F‑1500T — Direct‑Fired, 1,500,000 BTU/Hr (Dual‑fuel)
- FVO‑400 — Indirect‑Fired, 390,000 BTU/Hr
FAQs
Can I switch between natural gas and propane?
Yes. Set the fuel selector to the correct source and ensure supply pressure and regulators are correct for the chosen fuel.
Do I need ventilation?
Yes. Direct‑fired heaters require fresh air and adherence to local codes. Use outdoors or in well‑ventilated spaces only.
Does it work with a thermostat?
Yes — on/off thermostat control is supported. Follow manufacturer instructions for placement and wiring.
Temporary Climate Solutions F-400T
400,000 BTU/Hr · Direct‑Fired Dual‑Fuel Heater (Natural Gas / Propane)Model: F‑400T · Category: Direct‑Fired Construction Heater
Key Features
- Electronic direct spark ignition
- 100% flame safety control
- On/Off thermostat control
- Minimal products of combustion
- Portable, rugged design for jobsites
- Dual‑fuel: quickly switch between natural gas and propane
Applications
- Construction sites and temporary enclosures (with adequate ventilation)
- Industrial maintenance and general building heat
- Warehouses, large tents, and restoration projects
Safety note: Direct‑fired heaters add combustion products to the air. Provide fresh air and follow local codes; do not use in enclosed/occupied spaces without proper ventilation.
Downloads
Technical Specifications
| Fuel Type | Natural Gas / Propane |
|---|---|
| BTU/HR | 400,000 |
| CFM | 2,000 |
| Fuel Consumption | NG: 400 CFH · LPG: 4.37 GPH |
| Heat Exchanger | N/A (Direct‑fired) |
| Air Outlet Diameter | 15″ |
| Amperage Draw | 15 A |
| Power Requirements | 120 V |
| Dimensions (L×W×H) | 48″ × 22″ × 24″ |
| Weight | 90 lb |
*Specs per manufacturer. Always verify fuel supply, electrical, and ventilation for site conditions.
Need help sizing?
Our team can help you determine the right BTUs and air changes for your project.Related Models
- HC‑1000 — Direct‑Fired, 1,000,000 BTU/Hr (Dual‑fuel)
- F‑1500T — Direct‑Fired, 1,500,000 BTU/Hr (Dual‑fuel)
- FVO‑400 — Indirect‑Fired, 390,000 BTU/Hr
FAQs
Can I switch between natural gas and propane?
Yes. Set the fuel selector to the correct source and ensure supply pressure and regulators are correct for the chosen fuel.
Do I need ventilation?
Yes. Direct‑fired heaters require fresh air and adherence to local codes. Use outdoors or in well‑ventilated spaces only.
